Spray Calculation Tools
Spray boom flow calculator
With the calculation tool below, you can easily determine the correct flow for the spray booms.
The pump flow for the Top Cleaner is based on three spray booms being open at the same time as shown in the image below.
The pump flow for the Top Cleaner Poly is based on both spray booms being open at the same time as shown in the image below.
We recommend that you place a flow meter on the pump set. You can order this from Van der Waay.
The article number of this flowmeter is 47286 (Flowmeter 5-50L/MIN stainless steel).
If you do not use a flowmeter you will have to measure the flow per nozzle using a 3 liter measuring jug.
NOTE: for this calculation make sure that:
- The spray booms of the Top Cleaner are equipped with (red) TeeJet XR11004VK nozzles, and the driving speed is set on position 10 (25 meters per minute).
- The spray booms of the Top Cleaner Poly are equipped with (blue) TeeJet XR11003VK nozzles, and the driving speed is set on position 10 (15 meters per minute).
The information on this page is intended as advice only. No rights can be derived from the advice given on this page. Although Van der Waay B.V. takes great care when compiling and maintaining this page and uses its own experiences which are considered reliable, Van der Waay B.V. cannot guarantee the accuracy, completeness and topicality of the information provided. Nor can Van der Waay B.V. guarantee that the page will function without errors or interruptions. Van der Waay B.V. expressly disclaims any liability with regard to the accuracy, completeness and topicality of the information provided and the use of this page.
Units
Amount of spray mixture in liters
(coating + water) per
Top Cleaner model
Top Cleaner Poly model
Results Top Cleaner model
Required pump flowliters per minute
Required nozzle flow liters per minute
Results Top Cleaner Poly model
Required pump flowliters per minute
Required nozzle flow liters per minute
© Van der Waay 2024